Dsetting The Gps Alarm Function To All Memories (All Gps Memories) - Icom IC-705 Advanced Manual

12. GPS OPERATION (ADVANCED)
GPS Alarm

DSetting the GPS Alarm function to All Memories (all GPS Memories)

1. Open the GPS ALARM screen.
» GPS > GPS Alarm
2. Touch "Alarm Select."
3. Touch "Group."
4. Touch "All Memories."
LIf you want to set the alarm to a specific GPS
Memory group, touch "(No Group)" or "A" to "Z."
5. To close the GPS ALARM screen, push
several times.
LInformation
• When either one of the stations in the group enters
the set range, the alarm sounds 3 times.
• When the transceiver sounds a GPS Alarm, "GPS
ALARM" pops up on the screen, and " " blinks. See
the illustration below.
• To cancel the GPS Alarm function, touch "OFF" in
step 3 to the left.
"GPS ALARM" pops up on the screen
and the alarm sounds 3 times.
TIP: When selecting "All Memories," "No
Group," or a GPS Memory group (A ~ Z) in step
4 to the left, you also have to set "Alarm Area
(Group)" to use the GPS Alarm function.
» GPS > GPS Alarm > Alarm Area (Group)
12-25
Blinks