Icom IC-705 Advanced Manual page 33

3. SCOPE OPERATION (ADVANCED)
SCOPE SET screen
Waveform Type
Selects the outline waveform display for the FFT
scope screen.
• Fill: Displays only the waveform, in color.
• Fill+Line: Displays both the waveform and the
outline, in color.
Waveform Color (Current)
(Default: (R) 172 (G) 191 (B) 191)
Sets the waveform color for the currently
received signals.
LTouch and select the R (Red), G (Green), or B
(Blue) scale, and then rotate
level to between 0 and 255.
LThe color is displayed in the box above the RGB
scale.
Waveform Color (Line)
(Default: (R) 56 (G) 24 (B) 0)
Sets the waveform outline color for the currently
received signals.
LTouch and select the R (Red), G (Green), or B
(Blue) scale, and then rotate
level to between 0 and 255.
LThe color is displayed in the box above the RGB
scale.
Waveform Color (Max Hold)
(Default: (R) 45 (G) 86 (B) 115)
Sets the waveform color for the received signals
maximum level.
LTouch and select the R (Red), G (Green), or B
(Blue) scale, and then rotate
level to between 0 and 255.
LThe color is displayed in the box above the RGB
scale.
Waterfall Display
Turns the Waterfall display ON or OFF for the
normal scope or Mini scope screen.
LOn the Expanded scope screen, the Waterfall is
always displayed.
• OFF: Turns OFF the Waterfall display.
• ON: Turns ON the Waterfall display.
Waterfall Speed
(Default: Fill)
Selects the Waterfall speed.
• Slow: Sets the Waterfall speed to Slow.
• Mid: Sets the Waterfall speed to Mid.
• Fast: Sets the Waterfall speed to Fast.
Waterfall Size (Expand Screen)
Selects the Waterfall height in the Expand scope
screen.
• Small: The same height as the Normal scope
• Mid:
to adjust the
• Large: Only the Waterfall height expands.
Waterfall Peak Color Level
Selects the signal level that the Waterfall displays
a peak color.
Higher signal levels are Red, Yellow, Green,
Light-blue, Blue, and Black, in that order.
• Select between Grid 1 and Grid 8.
to adjust the
Waterfall Marker Auto-hide
Turns the Waterfall Marker Auto-hide function ON
or OFF.
• OFF: The marker in the Waterfall zone stays
• ON: The marker in the Waterfall zone is
to adjust the
(Default: ON)
3-3
screen, only the FFT scope expands.
The Waterfall height expands at the
same ratio as the FFT scope.
ON.
hidden 2 seconds after it stops in place.
(Default: Mid)
(Default: Mid)
(Default: Grid 8)
(Default: ON)