Derror Messages Of The Rs-Ms3W And The Rs-Ms3A - Icom IC-705 Advanced Manual

15. ABOUT THE DV GATEWAY FUNCTION
Troubleshooting

DError messages of the RS-MS3W and the RS-MS3A

If an error message is displayed when clicking (touching) <Start>
the following chart. If you are unable to locate the cause of a problem or solve it through the use of this
chart, contact your Icom Dealer or Service Center.
Message
Gateway Repeater (Server IP/
Domain) cannot be found.
Terminal/AP Call sign is
incorrect.
The USB cable is not
connected. (1MM)
The USB cable is not
connected. (2MM)
Failed to connect to the
network.
A Network error occurred.
Failed to start the service.
Possible Cause
The gateway repeater address is
not correctly entered.
Your Windows or Android device
does not connect to the Internet.
The Terminal/AP call sign is not
correctly entered.
Transceiver connection is wrong.
The transceiver is not turned ON.
The transceiver is in the Normal
mode.
The application cannot create a
socket for sending and receiving
data.
System error occurs when receiving
data from a network.
The gateway repeater address
or Terminal/AP call sign is not
correctly entered.
System error occurs when the
service started.
15-26
in the RS-MS3W or RS-MS3A, read
Solution
Correctly enter the gateway
repeater address.
Connect your Windows or Android
device to the Internet, and check
whether or not you can access to
a web site on the www browser.
Correctly enter the call sign.
L The call sign consists of 8
characters.
• Enter a space before the
character.
• Enter a desired ID suffix between
A to Z, except for G, I, and S, for
the 8th character.
Check the connection between
the transceiver and the Windows
device, or the transceiver and the
Android device.
Turn ON the transceiver.
Enter the Terminal mode or
Access Point mode.
Check whether or not the port
number (40000/40002) competes
with other application. If so, stop
the competing application.
Restart the RS-MS3W or
RS-MS3A. If an error message
does not disappear, restart
Windows or Android device.
Restart the RS-MS3W or
RS-MS3A. If an error message
does not disappear, restart
Windows or Android device.
Correctly enter the gateway
repeater address or Terminal/AP
call sign.
Restart the RS-MS3W or
RS-MS3A. If an error message
does not disappear, restart
Windows or Android device.
REF�
RS-MS3W,
RS-MS3A's
instruction
manual
–
RS-MS3W,
RS-MS3A's
instruction
manual
pp. 15-12,
15-13
–
pp. 15-14,
15-16
–
–
–
RS-MS3W,
RS-MS3A's
instruction
manual
–