Table of Contents
Advertisement
Previous view
7
NXDN™ OPERATION
Transmitting a call
NXDN operation enables you to make a call to a
specific station (Individual call) or to a particular group
(Talkgroup call). Other digital mode transceivers on
the channel will not receive a call that does not match
their Individual or Talkgroup ID and/or RAN (Radio
Access Number) code.
L When you want to send a Voice call, Call Alert call,
Status message, or message to all transceivers
within the communication range, use the 'All Call'
function.
Select the Talkgroup ID code "65535" for the
Conventional operation, or "2047" for the Trunking
operation.
D Transmitting a Voice call
You can transmit a Voice call to a target station or
Talkgroup stations.
<Menu operation>
TIP: The Portable type transceiver's operations are
described in red. And the Mobile type transceiver's
operations are described in blue.
LThe common operations are in black.
(MENU > CONTACT)
1. Push [Menu] to display the Menu screen.
• "CONTACT" is selected.
Portable
CONTACT
BACK
ENT
Mobile
M E N U
C O N T A C T
2. Push
[P1](ENT)
• The current call type is briefly displayed, then the
Contact menu screen is displayed.
LTo change the call type, see page 7-3.
Portable
CONTACT
TG1
BACK
ENT
Mobile
C O N T A C T
T G 1
3. Push
[P2](Ω) or [P3](≈)
select the destination ID.
• The preset ID is displayed.
TIP: If "DIRECT DIAL" is selected, you can
manually enter a target ID. See page 7-32 for
details.
4. Hold down [PTT] to transmit, and speak at your
normal voice level.
• The status indicator lights red while transmitting.
5. Release [PTT] to receive.
7-4
or [P2].
1
1
or
[ΩP3] or [P4≈]
to
Advertisement
Table of Contents
