Recorder Set Screen - Icom IC-705 Advanced Manual

5. VOICE RECORDER FUNCTIONS

RECORDER SET screen

You can change the recorder settings on this
screen.
1. Display the RECORDER SET screen.
» RECORD > Recorder Set
2. Touch the item to set.
(Example: TX REC Audio)
3. Touch the option to set. (Example: Monitor)
4. To close the RECORDER SET screen, push
.
TIP: You can set each item to its default by
touching the item for 1 second, and then
touching "Default" on the QUICK MENU screen.
TX REC Audio
Selects the transmit audio to record.
• Direct: Records the microphone audio.
• Monitor: Records the TX monitor audio.
RX REC Condition
Selects the recording setting for receive.
• Always: Records even if no signal is
received.
• Squelch Auto: Records only when the squelch
opens.
( The recording will be paused
when the squelch closes while
recording.)
(Default: Direct)
(Default: Squelch Auto)
File Split
Turns the File Split function ON or OFF.
• OFF: The audio is continuously recorded
into the file, even if you switch between
transmit and receive, or the squelch
status changes between open and
closed.
When the recording file's size becomes 2
GB, the transceiver continues to record,
but to a new file.
• ON: While recording, if you switch between
transmit and receive, or the squelch
status changes between open and
closed, a new file is automatically
created in the same folder, and the audio
is saved into the new one.
PTT Auto REC
Turns the PTT Automatic Recording function ON
or OFF.
• OFF: The recording does not start, even when
a signal is transmitted.
• ON: The recording automatically starts when
a signal is transmitted.
The recording will stop when:
• 10 seconds has passed after the last transmission.
• 10 seconds has passed if no signal is received after
the last transmission.
- If you receive a signal within 10 seconds after
the last transmission, the received audio is also
recorded.
- If you receive another signal within 10 seconds
after the last reception, the received audio is also
recorded.
• 10 minutes has past while operating with the
squelch is open in the SSB, CW, RTTY, or AM
mode.
• The frequency or operating mode is changed.
PRE-REC for PTT Auto REC
Selects whether or not to record the audio that
is received before the PTT Automatic Recording
function is activated.
• OFF: Does not record the audio.
• 5sec/10sec/15sec:
Records the audio that is previously
received in this set period of time.
5-5
(Default: ON)
(Default: ON)
(Default: 10sec)