Icom IC-705 Advanced Manual page 207

15. ABOUT THE DV GATEWAY FUNCTION
Troubleshooting
D Troubleshooting for the Terminal mode operation
Problem
After your call, the repeater
replies 'RPT?' and the access
repeater's call sign.
"L" appears on the LCD.
You can transmit, but cannot
receive from the destination
repeater.
Possible Cause
The repeater cannot connect to the
destination repeater.
The repeater is busy.
While receiving through the
Internet, some packets may be lost
due to network error (poor data
throughput performance).
You cannot connect to the Internet,
or Global IP address is not assigned.
The router or mobile router's port is
not correctly forwarded.
The firewall is blocking the
necessary port.
15-23
Solution
Wait for a while, and try again.
Wait for a while, and try again.
L When the transceiver receives
corrupted data, and misidentifies it
is as Packet Loss, "L" is displayed.
Check the Internet connection and
Global IP address assignment.
Forward the router or mobile
router's correct port to your deice.
Check your firewall settings.
REF�
–
–
p. 15-4
p. 15-4
p. 15-12