Maintenance (Advanced); Cloning - Icom IC-705 Advanced Manual

16. MAINTENANCE (ADVANCED)

Cloning

Step 3� Loading the setting data into the sub
transceiver�
1. Open the LOAD SETTING screen.
» SET > SD Card > Load Setting
2. Touch the file to load.
3. Touch "Select."
LIf you want to load all the contents on the LOAD
OPTION screen, touch "ALL," then go to step 6.
LIf you want to load only the repeater list, touch
"Repeater List Only," then go to step 6.
4. Touch the loading options.
(Example: CI-V Address)
• "✓" is displayed on the left side of the selected
option.
LThe Set mode settings and Memory channel
contents are always loaded.
5. Touch "<<Load>>."
6. Touch [YES] or [NO].
LWhen you touch [YES], the Skip settings on the
repeater list are retained.
LWhen you touch [NO], the Skip settings on the
repeater list are cleared.
7. Touch [YES].
• After the loading ends, "COMPLETED! Restart
the IC-705." is displayed.
LWhen you select "REF Adjust" in step 4, "The
new "REF Adjust" setting will be saved" is
displayed.
8. Turn the OFF transceiver power, and then
turn it ON again to restart the transceiver.
16-2