Ddirectly Entering (Ur); Ddirectly Entering (Rpt) - Icom IC-705 Advanced Manual

14. D-STAR OPERATION (ADVANCED)
"TO" (Destination) setting

DDirectly entering (UR)

The destination station call sign can be directly
entered.
Example: Directly entering the call sign "JM1ZLK."
1. Touch "TO" to select, and then touch "TO" again.
2. Touch "Direct Input (UR)."
• Displays the DIRECT INPUT (UR) screen.
3. Enter the station's call sign of up to 8
characters, including spaces.
4. After entering, touch [ENT].
• Returns to the DR screen, and the entered call
sign is displayed in "TO."
LAfter entry, you can edit the call sign in the
DIRECT INPUT (UR) screen.
LThe entered call sign remains on the DIRECT
INPUT (UR) screen, until you enter a new call
sign.
TIP: If the entered call sign has a duplicate in the
"Your Call Sign" memory, the name is displayed.
(Only when the name has been entered.)

DDirectly entering (RPT)

The destination repeater call sign can be directly
entered.
NOTE: BE SURE to include the node letter as
the 8th digit. See page 13-5 "IMPORTANT!"
about the node letters.
Example: Directly entering the call sign "JP3YDH A."
1. Touch "TO" to select, and then touch "TO" again.
2. Touch "Direct Input (RPT)."
• Displays the DIRECT INPUT (RPT) screen.
3. Enter a repeater call sign of up to 8
characters, including spaces.
(Example: Hirano)
• Returns to the DR screen, and the selected
repeater name is displayed in "TO."
LAfter entry, you can edit the call sign in the
DIRECT INPUT (RPT) screen.
LThe entered call sign remains on the DIRECT
INPUT (RPT) screen, until you enter a new call sign.
TIP:
• If the entered call sign has a duplicate in the
repeater list, the name is displayed.
(Only when the name has been entered.)
• When directly entering the repeater call sign,
including a "/" at the beginning is also correct.
14-9