Entering New Information Into The Repeater List; Drequired Items For The Communication Cases - Icom IC-705 Advanced Manual

14. D-STAR OPERATION (ADVANCED)

Entering new information into the repeater list

This section describes how to manually enter
new repeater information into the repeater list.
The required setting items differ, depending on
your communication usage. Confirm the required
items, as shown below.
NOTE: To enter repeater information into the
repeater list, the repeater's call sign must be
entered first.

DRequired items for the communication cases

Repeater list Used as an
contents access repeater
TYPE DV Repeater
NAME
SUB NAME
CALL SIGN
GW CALL SIGN
(For a Gateway call)
GROUP
USE(FROM)
FREQUENCY
DUP
OFFSET FREQ
TONE
REPEATER
TONE
POSITION
LATITUDE
LONGITUDE
UTC OFFSET
Must be entered
�:
Possible to enter
:
N/A: Not Applicable
Used as a
destination
repeater
DV Repeater
 
 
� �
�
�
 
� 
� 
� 
� 
N/A N/A
N/A N/A
 
 
 
 
Used as an FM
repeater
FM Repeater DV Simplex



N/A

�
�
�
�






14-24
Simplex (FROM)
FM Simplex
 
 
N/A N/A
N/A N/A
 
� �
� �
N/A N/A
N/A N/A
N/A

N/A

 
 
 
 