Bluetooth ® Settings; Daf Output; Dheadset Function Select - Icom IC-705 Advanced Manual

10. Bluetooth
® OPERATION
Bluetooth Settings
®

DAF Output

You can select the AF Output device.
If "AF Output" is set to "Headset & Speaker," you
can hear audio from both a connected Bluetooth
headset and the transceiver's speaker.
1. Open the HEADSET SET screen.
» SET > Bluetooth Set > Headset Set
2. Touch "AF Output."
3. Touch "Headset & Speaker."
4. To close the HEADSET SET screen, push
several times.
LAudio is heard from both the connected
Bluetooth headset and the transceiver's
speaker.
TIP: When "AF Output" is set to "Headset Only,"
the following dialog is displayed if the Bluetooth
connection is accidentally disconnected.
• [YES]: The audio is output from the transceiver's
speaker.
• [NO]: The transceiver's volume level is
automatically set to 0%, and the audio is
not output from the transceiver's speaker.

DHeadset Function Select

You can select the PTT and microphone
combination when either a Bluetooth headset or
the transceiver microphone are used.
1. Open the HEADSET SET screen.
» SET > Bluetooth Set > Headset Set
2. Touch "Headset Function Select."
3. Touch an option.
4. To close the HEADSET SET screen, push
several times.
NOTE: DO NOT select "PTT" when you use
only the Bluetooth headset.
Select "Microphone"
Using the Bluetooth headset
as a microphone.
Voice from
the Bluetooth
headset
Push PTT on the Push PTT on the
microphone microphone
10-3
Select "PTT"
Using the Bluetooth headset
as a PTT switch.
Voice from the Voice from the
microphone microphone
Push PTT on the
Bluetooth headset