Important Notes; Legal Principles; Copyright; Personnel Qualification - WAGO -I/O-SYSTEM 750 Technical Description

1 Important Notes

This section provides only a summary of the most important safety require-
ments and notes which will be mentioned in the individual sections. To protect
your health and prevent damage to the devices, it is essential to read and care-
fully follow the safety guidelines.

1.1 Legal Principles

1.1.1 Copyright

This manual including all figures and illustrations contained therein is subject
to copyright. Any use of this manual which infringes the copyright provisions
stipulated herein, is not permitted. Reproduction, translation and electronic
and phototechnical archiving and amendments require the written consent of
WAGO Kontakttechnik GmbH & Co. KG, Minden. Non-observance will en-
tail the right of claims for damages.
WAGO Kontakttechnik GmbH & Co. KG reserves the right of changes serv-
ing technical progress.
All rights developing from the issue of a patent or the legal protection of util-
ity patents are reserved to WAGO Kontakttechnik GmbH & Co. KG. Third-
party products are always indicated without any notes concerning patent
rights. Thus, the existence of such rights must not be excluded.

1.1.2 Personnel Qualification

The use of the product described in this manual requires special qualifications,
as shown in the following table:
Activity
Assembly
Commissioning
Programming
Maintenance
Troubleshooting
Disassembly
*)
**) A specialist is someone who, through technical training, knowledge and experience,
All personnel must be familiar with the applicable standards.
WAGO Kontakttechnik GmbH & Co. KG declines any liability resulting from
WAGO-I/O-SYSTEM 750
CANopen
Electrical specialist
Instructed persons have been trained by qualified personnel or electrical specialists.
demonstrates the ability to meet the relevant specifications and identify potential dangers in
the mentioned field of activity.
Instructed person-
nel*)
X X
X
X X
X
X X
Important Notes • 7
Legal Principles
Specialists**) having
qualifications in PLC
programming
X
X