WAGO -I/O-SYSTEM 750 Technical Description page 134

134 • CANopen
Network Communication
4.3.4.4.13 Object 0x6424, Analog Input Interrupt Upper Limit Integer
Idx
0x6424
This object allows a threshold value monitoring if it is configured in object
0x6423. If the input value is ≥ the defined threshold value, no transmission
will take place until a further trigger condition is set (i.e. object 0x6426).
Threshold value
4.3.4.4.14 Object 0x6425, Analog Input Interrupt Lower Limit Integer
Idx
0x6425
This object allows a threshold value monitoring if it is configured in object
0x6423. If the input value is ≤ the determined threshold value, transmission
will take place until a further trigger condition is set (i.e. object 0x6426).
Threshold value
4.3.4.4.15 Object 0x6426, Analog Input Interrupt Delta Unsigned
Idx
0x6426
The new value to be transmitted must, by definition of this object, be larger by
at least the delta value or smaller than the value sent before.
This object, for instance, can be linked with the object 0x6424, so that the
transmission will only be completed when the set threshold value and also the
delta function are fulfilled.
Previous value
S-Idx Name
0 Number analog input channels
(16Bit)
1 Upper Limit 1. channel
.... ....
128 Upper Limit 128. channel
S-Idx Name
0 Number analog input channels
(16Bit)
1 Lower Limit 1. channel
.... ....
128 Lower Limit 128. channel
S-Idx Name
0 Number analog input channels
(16Bit)
1 Delta value 1. channel
.... ....
128 Delta value 128. channel
Delta
Delta
Type Attribute
Unsigned8 RO
Unsigned16 RW
.... ....
Unsigned16 RW
Transmission
Type Attribute
Unsigned8 RO
Unsigned16 RW
.... ....
Unsigned16 RW
Transmission
Type Attribute
Unsigned8 RO
Unsigned16 RW
.... ....
Unsigned16 RW
Transmission
Transmission
WAGO-I/O-SYSTEM 750
Default Value
-
0
....
0
g012435e
Default Value
-
0
....
0
g012436e
Default Value
-
0
....
0
g012437e
CANopen