WAGO -I/O-SYSTEM 750 Technical Description page 127

4.3.4.3.25 Object 0x5201, Diagnostics Configuration Object
Idx S-Idx Name
0x5200 0 max. supported Sub
index = Number of
modules
1 Diagnostics behavior of
the 1st put module
....
64 Diagnostics behavior of
the 64th put module
4.3.4.3.26 Object 0x5202, Module Configuration Object
Note
This Object always refers to the physical configuration. That means, also on
use of the spacer module configuration only the physical modules and no
virtual modules are considered.
Idx S-Idx Name
0x5202 0 max. supported Sub
index
1 Module description
2 Module description
3 Module description
... ...
65 Module description
WAGO-I/O-SYSTEM 750
CANopen
Type Attribute
Unsigned8 RO
Unsigned8 RW
Unsigned8 RW
Type Attribute
Unsigned8 RO
Unsigned64 RO
Unsigned64 RO
Unsigned64 RO
... ...
Unsigned64 RO
Network Communication
Default Value Meaning
- Maximally supported Subindex = Num-
ber of modules
0 Each bit within the byte represents a
channel of the module (bit 0 channel 0,
bit 1 channel 1..., bit 7 channel 7)
Bit n = 1: no diagnostics messages are
transmitted via Emergency
(n=0...7)
If all bits are set to 1 (255)
the transmission of the diagnostics mes-
sages via Emergency is deactivated for
this module, independently of the channel
number of the module.
....
0 Each bit within the byte represents a
channel of the module (bit 0 channel 0,
bit 1 channel 1..., bit 7 channel 7)
Bit n = 1: no diagnostics messages are
transmitted via Emergency
(n=0...7)
If all bits are set to 1 (255)
the transmission of the diagnostics mes-
sages via Emergency is deactivated for
this module, independently of the channel
number of the module.
Default Value Meaning
- Maximally supported Subindex = Num-
ber of physical I/O modules inclusive
fieldbus coupler
- Subindex 1 always refers to the descrip-
tion of the fieldbus coupler
- 1. I/O-Module
- 2. I/O-Module
... ...
- 64. I/O-Module
CANopen • 127