Rear Brakes Torque/Inspection - Honda Acura NSX 1991 Service Manual

Rear Brakes
Torque/Inspection
assemblies.
breathing brake dust.
ability.
: BRAKE CYLINDER GREASE (P/N
RUBBER GREASE
: SILICONE GREASE
10 mm FLANGE BOLT
50 N*m (5.0 kg-m,
BLEED SCREW
9 N*m (0.9 kg-m.
CAM BOOT
LEVER \
P A R K I N G - N U T v
28 N-m (2.8 kg-m.
20 lb-ftl
RETURN SPRING
19-16
OR EQUIVALENT
110 Nom (11 kg-m,
INNER PAD SHIM
Check for wear.
Apply Molykote M77 to
pad side of shim.
CALIPER BODY
Check for scoring
on cylinder wall.
PAD SPRING
Check for wear or
damage.
\ \
I
Check for damage. RETAll
ARM
8x l.Omm
kg-m, 17 lb-ft)
23 Nom (2.3
CAUTION:
l Do not spill brake fluid on the car; it may damage
the paint; if brake fluid does contact the paint,
wash it off immediately with water.
l To prevent spills, cover the hose joints with rags
or shop towels.
all passages with compressed air.
free of dust and other foreign particles.
specified to do so.
allowed to contaminate the brake fluid.
they may not be compatible.
DOT3 or 4 Brake fluid.
NOTE:
clean brake fluid.
ever disassembled.
PIN BOOT
Check for deterioration
or damage.
I
Check for wea
Check for
SPRING COVER
Check for damage.
R I N G
PISTON ASSEMBLY-,
Check for scoring on
the surface.
CALIPER
BRACKET
/ C h e c k f o r
Check for weakness
or damage.
BRAKE PADS
Check lining thickness.
OUTER PAD SHIM
Check for wear.
Apply Molykote M77 to
pad side of shim.
Replace.
PISTON BOOT
Replace.