Honda Acura NSX 1991 Service Manual page 399

0
0
Power from the mainshaft 3rd gear drives the countershaft 3rd gear. Since at this time there is no hydraulic pressure
1 .
to the 3rd clutch. The countershaft 3rd gear turns freely and drives the secondary shaft 3rd gear.
2. The power is also transmitted to the secondary shaft 2nd gear because hydraulic pressure is applied to 2nd clutch.
3. The secondary shaft 2nd gear drives the countershaft 2nd gear. Power is transmitted to the final drive gear and
drives the final driven gear.
NOTE:
exceeds that of 1st gear, power from 1st gear is cut off at the one-way clutch.
l Power flow in D position, 2nd speed is the same as 2 position.
TORQUE CONVERTER
MAINSHAFT 3RD GEAR
I
HAFT IST GEAR
ONE-WAY CLUT-CH COUNTERSHAFT
SECONDARY SHAFi
2ND CLUTCH
SECONDARY SHAFT 2ND G
SECONDARY SHAFT 3RD GEAR
FINAL DRIVEN GEAR