Honda Acura NSX 1991 Service Manual page 488

L. Side Cover
NOTE:
Clean all parts thoroughly in solvent or carburetor cleaner and dry with compressed air.
l
Cut the lock tab and raise it, then remove the locknut of each shaft.
l
1 .
Remove the speed sensor cover, then reinstall three bolts around the driveshaft oil seal.
CAUTION: Do not damage the driveshaft oil seal lip.
2. Slip the special tool onto the mainshaft and engage the parking brake pawl with the parking gear.
3. Remove the transmission L. Side Cover in the following numbered sequence.
NOTE: Remove the special tool from the mainshaft after removing the locknuts.
14-106
Reinstall 3 bolts around
the driveshaft oil seal.
CAUTION: Protect the lip of the
driveshaft oil seal by reinstalling three
bolts, after removing the speed sensor
cover.
DRIVERSHAFT
OIL SEAL
SPEED
COVER BOLT
NOTE: Using
a chisel, cut the lock tab. Fry
it up
and then remove the locknut from each
shaft.
SENSOR