Honda Acura NSX 1991 Service Manual page 582

7. Remove the combination switch assembly from the
column shaft.
NOTE: The combination switch can be removed by
disconnecting only the TCS connector.
COMBINATION SWITCH
8. Remove the steering joint cover.
STEERING JOdT
COVER
9. Remove the steering joint bolts and washers from
the joints.
10. Disconnect the ignition switch connectors and re-
move the column holder, then remove the column
assembly by removing the attaching nuts.
HOLDER
mm
8x1.25
BOLT WASHERS
LOCK WASHERS
FLANGE NUTS
17-13