Wheel
Alignment
NSX four wheel alignment requires the use of equipment designed specifically for four wheel independent suspensions
and capable of immediate feedback.
NOTE: For proper inspection/adjustment of the wheel alignment, check and adjust the following before checking
the
alignment.
l
Check the suspension ball joints. (Hold a wheel with your hands and move it up and down and right and left to
check for wobbling.)
Standard value
Front
Rear
Front:
Ground clearance to the center of the lower
control arm bolt
Height
inspection:
not be showing). If the height is out of specification, load or unload the car as necessary.
18-6
Tire size
Tire pressure psi (kpa)
33 (230)
40 (275)
Rear:
Ground clearance to the center of the toe con-
trol arm bolt
Standard height mm (in)
[empty car1
170-180 mm (6.7-7.1 in)
213-223 mm (8.4-8.9 in)