Replacement
1 .
Remove the flywheel mounting bolts and the
flywheel.
2.
Remove the bearing from the flywheel.
3.
DRIVER
ATTACHMENT,
37 x 40 mm
0 7 7 4 6 - 0 0 1 0 2 0 0
RING G/EAR HOLDER
4.
5. Install the special tool, then torque the flywheel
Drive in the new bearing into the flywheel using the
special
tools.
Align the hole in the flywheel with the crankshaft
dowel pin and install the flywheel. Install the bolts
finger tight.
bolts in a crisscross pattern, as shown.
FLYWHEEL
RING GkAR HOLDER