Honda Acura NSX 1991 Service Manual page 1205

All SRS wire harnesses and connectors
are colored yellow. Do not use electrical test equipment
on these circuits.
CAUTION: Be careful no to damage the SRS wire har-
nesses when servicing the lighting system.
1 . Remove the dashboard lower panel and disconnect
the 2-P connectors from the floor wire harness.
Remove the dashboard center panel.
2.
3. Remove the tilt cover.
DASHBOARD
L O W E R P A N E L
CENTER
PANEL
TILT COVER
4. Remove the steering column lower cover and upper
cover.
5. Disconnect the TCS switch connector and dashlight
brightness controller connector.
10-P
C O N N E C T O R
6. Remove the 6 screws, then remove the instrument
panel from the dashboard.
7. Remove the dashlight brightness controller from the
instrument panel.
COVER
SWITCH
23-219