Honda Acura NSX 1991 Service Manual page 536

Shift Cable
SRS wire harness is routed near the gearshift selector.
All SRS wire harnesses and connectors are
colored yellow. Do not use electrical test equipment on
these circuits.
CAUTION: Be carefull not to dama<ge the SRS wire har-
ness when servicing the gearshift selector.
CONTROL
L O C K P I N
install in this
direction.
/ I .
8
SHIFT CABLE
SHIFT CABLE
Make sure liis are placed properly.
1 . Remove the center console panel.
2. Remove the shift cable by removing the cotter pin and
selector lever pin from the selector lever, and mount-
ing bolts from the bracket beam.
3. Remove the shift cable clamps.
4. Remove the shift cable holder and shift cable cover.
5 . Remove the shift cable by removing the lock pin and
control lever pin from the control lever.
CAUTION: Take car not to bend the cable when
removing it.
6 . Install the shift cable in the reverse order of removal.
7. Check the cable adjustment on reassembly, on page
14-153.
SHIFT CABLE
HOLDER
MOUNTING BOLT
BRACKET BEAM
SELECT LEVER
SELECT
LEVER PIN