Honda Acura NSX 1991 Service Manual page 845

Door Mirror
NOTE: Raise the window fully.
1 . Remove the door panel and carefully remove the
plastic cover (pages 20-6, 7).
2. Disconnect the power
3. Remove the 2 mounting nuts from the hole in the
door while holding the mirror.
NOTE: Do not drop the mounting nuts inside the
door.
POWER MIRROR
CONNECTOR
4. Install the door mirror in the reverse order of
removal.
5. With the door closed fully, check for water and air
leaks.
NOTE: Do not use high pressure water.
mirror connector.
1 . insert a screwdriver in the mirror through the ser-
vice hole, and loosen the actuator retaining screw.
2. Pull the actuator and glass out from the mirror
housing.
3. Install the actuator and glass in the reverse order of
removal.
ASSEMBLY
20-I 9