Disassembly/Reassembly - Honda Acura NSX 1991 Service Manual

4. Lift the reverse idler gear shaft, then remove the
spring pin from the groove and remove the idler
gear shaft assembly.
REVERSE IDLE GEAR
SHAFT ASSEMBLY

-Disassembly/Reassembly

NOTE:
Prior to reassembling, clean all the parts
in solvent, dry them and apply lubricant
to any contact surface.
THRUST NEEDLE BEARING
Inspect for wear and operation.
THRUST NEEDLE BEARING
Inspect for wear and operation.
THRUST NEEDLE BEARING
Inspect for wear and operation.
REVERSE DRIVEN GEAR
Inspect for wear or damage.
NEEDLE BEARING
Inspect for wear and operation.
Inspect for wear and operation.
SYNCHRO RING
inspection, page J 3-35
REVERSE SYNCHRO SLEEVE
Inspection, page 13-I 6
REVERSE IDLE GEAR SHAFT
Inspect for wear or damage.
3 x 6 mm SPRING PIN
T NEEDLE BEARING
BEARING
Inspect for wear and operation.
REVERSE DRIVE GEAR
Inspect for wear or damage.
2 x 38 x 2.2 mm
RUST WASHER
WASHER