Honda Acura NSX 1991 Service Manual page 500

Regulator Valve Body
Disassembly/Inspection/Reassembly
NOTE:
l Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
Hold the regulator spring cap in place while removing the lock bolt. Once the bolt is removed, release the spring
cap slowly.
CAUTION: The regulator spring cap can pop out when the lock bolt is removed.
Reassembly is in the reverse order of disassembly.
NOTE:
Coat all parts with ATF.
l
the lock bolt.
ROLLER
PAD
VALVE
COOLER RELIEF
VALVE
SPRING SPECIFICATIONS
No.
Spring
reaction spring
Regulator valve spring A
Regulator valve spring B
Cooler relief valve spring
L/C control spring
14-118
LOCK-UP CONTROL
Wire Dia.
6.0 (0.236)
1.58 x 2.0
(0.062 x 0.079)
1.8 (0.071)
1.2 (0.047)
0.8 (0.031)
REGULATOR SPRING CAP
REGULATOR VALVE
6 x l O m m
- -
Standard (New)
O.D. Free Length
38.4 (1.512)
30.3 (1.193)
14.7 (0.579)
88.6 (3.488)
9.6 (0.378)
44.0 (1.732)
8.4 (0.331)
35.7 (1.406)
6.6 (0.260) 38.3 (I.5081 1
Unit of length: mm (in
No. of Coils
2.0
20.9
14.7
16.5
25.0