Honda Acura NSX 1991 Service Manual page 382

9. Install the reverse shift arm.
mm
6 x 1 .O SPECIAL BOLTS
15 Nom (I .5 kg-m, 11 lb-ft)
10. Apply liquid gasket to the transmission mating sur-
face of the clutch housing.
NOTE: This transmission uses no gasket between
the major housings; use Honda Genuine liquid
gasket (P/N OY740-99986).
ing within 20 minutes after applying the liquid
gasket and allow it to cure at least 30 minutes after
assembly before filling it with oil.
Assemble the hous-
11. Install the dowel pins on the clutch housing.
12. Place the transmission housing over the clutch
housing, being careful to line up the shafts.
NOTE: Make sure the 3rd/4th shift fork shaft col-
lar mates with the 3rd/4th shift fork shaft.
a. Place the shift lever
SHIFT ARM
a shown.
as
SHIFT LEVER
(cont'dl