Honda Acura NSX 1991 Service Manual page 384

15. Tighten the transmission housing attaching bolts in
the numbered sequence
Torque: 45 Nom (4.5 kg-m, 33 lb-ft)
16. install the 36 mm sealing bolt.
NOTE: Apply Honda Genuine liquid gasket (P/N
to the flange.
17. Install the steel balls, spring and sealing bolts.
NOTE: Apply Honda Genuine liquid gasket (PIN
to the threads, but don't plug the
hole with liquid gasket.
18. Install the upper cover.
14 x I:0 mm SEALING BOLT
33 N*m (3.3 kg-m, 24 lb-ft)
36 mm SEALING BOLT
35 N-m (3.5 kg-m, 25 lb-it)
33 lb-ft)
UPPER
6 x 1.0 mm BOLTS
12 Nom (1.2 kg-m, 9 lb-ft)
shown below.
BOLTS
19. Install the back-up light switch and neutral switch.
NOTE: Apply Honda Genuine liquid gasket (P/N
20. Install the speed sensor.
12 Nom (I .2 kg-m, 6.7 I
SPEED SENSOR
ACK-UP LIGHT SWITCH
5 Nom (2.5 kg-m, 18 lb-ft)
24 Nom (2.4 kg-m, 17 lb-ft)
6 x 1.25 mm BOLTS
24 N*m (2.4 kg-m, 17 lb-ft)
UTRAL SWITCH