Wiring Locations - Honda Acura NSX 1991 Service Manual

Wiring Locations

CAUTION: Make sure all SRS ground locations are clean and grounds are securely attached.
NOTE:
l All SRS electrical wiring harnesses are covered with yellow outer insulation.
l Replace the entire affected SRS harness assembly if there is an open circuit or damage to the wiring.
GAUGE ASSEMBLY
and FLOOR HARNESS
30-P Connector
2-P Connector
DASH SENSOR (Ll and
2-P Connector
1-16
GAUGE ASSEMBLY
and FLOOR HARNESS
30-P Connector
CABLE REEL and INFLATOR
3-P Connector
CABLE REED and
SRS
MAIN HARNESS
6-P Connector
CHECK CO;UNECTOR
FLOOR HARNESS
DASH SENSOR (RI
I
ASH SENSOR (R) and
FLOOR HARNESS and
4-P Connector
18-P Connector