Transmission Housing
NOTE: Place the clutch housing on two pieces of wood
thick enough to keep the mainshaft from hitting the
workbench.
1. Remove the back-up light switch, neutral switch
and speed sensor.
BACK-UP LIGHT SWITCH
2.
Remove the sealing bolts, springs and steel balls.
3. Remove the upper cover, then remove the
transmission
housing
4.
Remove the 36 mm sealing bolt.
UPPER
attaching
bolts.
mm
36
SEALING BOLT
5.
Expand the snap ring on the countershaft ball bear-
ing and remove it from the groove using a pair of
snap ring pliers.
6.
Separate the clutch housing from the transmission
housing.
7.
Remove the thrust shim and oil guide plate from the
transmission
housing.
THRUST SHIM