Honda Acura NSX 1991 Service Manual page 1059

SRS wire harness is routed near the steering lock as-
sembly.
All SRS wire harnesses and connectors
are colored yellow. Do not electrical test equipment on
these circuit.
CAUTION: Be careful not to damage the SRS wire har-
ness when servicing the steering lock.
1 . Remove the dashboard lower and center panels.
2. Remove the steering column covers.
3. Remove the knee bolster and dash lower frame.
4. Disconnect the 7-P and 6-P connectors.
KNEE BOLSTER
4. Remove the column holder mount bolts.
5. Remove the mounting nuts.
6. Lower the steering column assy.
7. Center punch each of the shear bolts and drill their
heads off with a 3/16 in. drill bit.
CAUTION: Do not damage the switch body when
removing the shear bolt head.
8. Remove the shear bolts from the switch body.
NOTE: The illustration shows A/T.
12 lb-ft)