Honda Acura NSX 1991 Service Manual page 665

Knuckle/Control Arms/Compliance Pivot
Illustrated Index
Overall Suspension
NOTE:
Torque specifications, see page 18-14.
*UPPER CONTROL BALL JOINT
Inspect for faulty
movement and wear.
COMPLIANCE PIVOT
ASSEMBLY
Check for damage or cracks.
Check for deterioration or damage.
\
COMPLIANCE PIVOT
LOWER BRACKET
Check for damage or
cracks.
NOTE: Replace the joint boot if any are damaged. The parts marked with an asterisk (*) have a retainer attaching
the ball joints. Replace the retainer whenever the boot is replaced.
CAUTION: Do not remove the arms, knuckle, and compliance pivot by striking them with a hammer, and take care
not to drop them.
18-20
STABILIZER BAR
Check for damage.
I ' ,
LOWER CONTROL ARM
Check for damage or cracks
*LOWER CONTLOL ARM BALL JOINT
Inspect for faulty
movement and wear.
NOTE: Align the white line on the stabilizer bar with the
bushing end and install the stabilizer bar.
STABILIZER LINK
Inspect for faulty
movement and wear.
UPPER CONTROL ARM
Check for damage
or cracks.
I
23 Nom (2.3 kg-m, 17 lb-ft)
*UPPER ARM BALL
JOINT
Inspect for faulty
movement and
w e a r .
FRONT KNUCKLE
Check for damage
\
LOWER
BALL JOINT
inspect for faulty
movement and wear.