Disassembly - Honda Acura NSX 1991 Service Manual

Driveshafts

-Disassembly

1 . To remove the boot band, pry up the locking tabs
with screwdriver and raise the end of the band.
NOTE: Carefully clamp the driveshaft in a vise
with soft jaws.
CAUTION: Take care not to damage the boots.
2. Remove both joints.
groove.
Outboard joint only.
3. Remove the rollers from the spider.
4. Remove the set ring, then remove the spider with a
bearing remover.
NOTE: Before disassembly, mark the spider and
driveshaft so they can be reinstalled in their original
positions.
SET RING
ROLLER
BEARING REMOVER