Honda Acura NSX 1991 Service Manual page 593

Manual Steering
-Overhaul (Cont'd)
replace the bearing using the special tools.
NOTE: Hold the outer race with the tool securely.
Press the steering pinion into the new bearing.
l
NOTE:
ner race toward the gear.
BEARING
BASE
Bearing mark
10. Remove the steering
rack from the cylinder.
if it is damaged.
Remove the bearing by lightly tapping with a plas-
tic hammer as shown. If the bearing is hard to re-
move by tapping, heat the gearbox by soaking it
in 100°C (212OF) water.
CAUTION: To avoid burns, use heavy gloves when
handling the heated gearbox.
LOWER BEARING
Tap with a plastic hammer to
remove the bearing.