Reassembly - Honda Acura NSX 1991 Service Manual

2. Inspect for runout.
Standard: 0.02 mm (0.0008 in.) min.
Service Limit: 0.05 mm (0.0020 in.)
NOTE: Support the mainshaft at both ends as
shown.
Rotate
two complate revolutions.
If the runout exceeds the service limit, replace the
mainshaft a new one.
with
CAUTION:
Press the 3rdl4th and 5th synchro hubs on the
mainshaft without lubrication.
When installing the 3rdl4th and 5th synchro hubs,
support the shaft on steel blocks and install the
synchro hubs using a press.
install the 3rdI4th and 5th synchro hubs with a
maximum pressure of 1.000 kg, and press the
2.000 kg.
The clutch housing ball bearing is installed when
it's time to check the mainshaft clearances.
Support 2nd gear on steel blocks as shown, then
install the 3rdl4th synchro hub using a press.
HUB