Honda Acura NSX 1991 Service Manual page 29

Driven gear boss-to-transmission housing clearance
Oil pump
Driven gear thickness
Inner-to-outer rotor radial clearance
Pump body-to-outer rotor radial clearance
Pump body-to-outer rotor side clearance
Svncro ring Ring-to-gear clearance (ring pushed against gear)
Shift fork Finger thickness
Finger-to-syncro sleeve clearance
Reverse shift arm Arm-to-Bthlreverse shift piece clearance
Groove width
Arm-to-reverse shift fork clearance
Diameter
(at the contact point with the reverse shift fork)
Shift arm Arm-to-shift piece clearance
Diameter (at the contact point with the shift piece)
Interlock Interlock-to-select alrn clearance
Diameter (at the contact point with the select arm)
Shift piece Shift piece-to-shift forks and Bth/reverse
clearance
Diameter (at the contact point with the shift forks and
MEASUREMENT
5th shift fork
Reverse shift fork
shift piece
shift niece)
STANDARD (NEW)
0.3-0.8 (0.01-0.03)
17.0-17.1 (0.669-0.673)
0.14 (0.006)
0.03-0.10 (0.001-0.004~
0.85-I. IO (0.034-0.043)
8.9-9.0 (0.350-0.354)
shift fork 7.4-7.5 (0.29-0.30)
6.4-6.5 (0.25-0.26)
6.4-6.5 (0.25-0.26)
O-45-0.65 (0.018-0.026)
0.05-0.30 (0.002-0.012)
7.05-7.20 (0.278-0.283)
0.05-0.35 (0.002-0.014)
12.8-13.0 (0.504-0.512)
0.05-0.25 (0.002-0.0101
12.9-13.0 (0.508-0.512)
0.03-o. 15 (0.001-0.006)
11.95-I 2.00 (0.470-0.472)
0.2-0.5 (0.008-0.020)
11.9-12.0 10.460-0.472)
Unit of length: mm (ir
SERVICE LIMIT
0.9 (0.04)
16.9 (0.665)
0.20 (0.008)
0.22 (0.009)
0.15 (0.006)
0.4 (0.016)
1 .o (0.039)
0.5 (0.02)
0.5 (0.02)
0.5 (0.02)
0.6 (0.024)