22. Install the oil pump on the cylinder block.
23. Install the oil pass pipe and the joint.
24. Install the baffle plate.
25. Install the oil screen.
SPECIAL BOLTS
SPECIAL BOLTS
6 x l . O m m
22 Nom (2.2 kg-m. Replace.
16 lb-ft)
Replace.
OIL PUMP
Apply liquid gasket to
cylinder block mating
surface.
6 x l . O m m
12 N-m (1.2 kg-
9 lb-ft)
OIL PASS
6 x l . O m m
12 Nom (1.2 kg-m,
9 lb-ft)
26. Install the oil pan and gasket.
NOTE:
be repaired or the oil pan should be replaced
with a new one so as to retain proper clearance
between the screen and the bottom.
OIL PAN BOLTS and NUTS TORQUE SEQUENCE