At^scni List Call Number Information; At^slcd Display Last Call Duration; At^stcd Display Total Call Duration - Multi-Tech MultiModem EDGE Reference Manual

7.26 AT^SCNI List Call Number Information

Description:
Test Command Syntax:
Response:
Exec Command Syntax:
Response:
Parameter Descriptions:
<id>
Call identification number; this number can be used in AT+CHLD command operations.
1...7
<cs>
Call status of respective call number (first parameter)
0 call hold
1 call in progress
2 waiting call
<number>
string type phone number in format specified by <type>
<type>
type of address octet in integer format; 145 when dialing string includes international access code character "+";
otherwise 129
See also AT+CLCC
Note:

7.27 AT^SLCD Display Last Call Duration

Description:
Test Command Syntax:
Response:
Exec Command Syntax:
Response:
Parameter Description:
<time>
Format is "hh:mm:ss", where characters indicate hours, minutes, seconds; e.g., 22:10:00 "22:10:00"
Max value is 9999:59:59
The proper working of that command is network dependent.
Note:

7.28 AT^STCD Display Total Call Duration

Description:
Test Command Syntax:
Response:
Exec Command Syntax:
Response:
Parameter Description:
<time>
Format is "hh:mm:ss", where characters indicate hours, minutes, seconds; e.g., 22:10:00 "22:10:00"
Max value is 9999:59:59
Notes:
•
The Total Call Duration will not be reset by power off or other means.
•
The proper working of that command is network dependant and only for MO calls.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
TA returns a list of current calls of ME.
AT^SCNI=?
OK
AT^SCNI
^SCNI: <id>1[,<cs>[,<number>,<type>]]
^SCNI: <id>2[,<cs>[,<number>,<type>]]
[...]
OK
ERROR
+CME ERROR: <err>
TA returns last call duration or current call duration.
AT^SLCD=?
OK
ERROR
+CME ERROR
AT^SLCD
^SLCD: <time>
OK
ERROR
+CME ERROR
TA returns total call duration (accumulated duration of all calls).
AT^STCD=?
OK
ERROR
+CME ERROR
AT^STCD
^STCD: <time>
OK
ERROR
+CME ERROR
Chapter 7 – Call-Related Commands
97