At^sgact Query All Pdp Context Activations - Multi-Tech MultiModem EDGE Reference Manual

11.14 AT^SGACT Query All PDP Context Activations

Description:
Test Command Syntax:
Response(s):
Read Command Syntax:
Response(s):
Exec Command Syntax:
Response(s):
Parameter Descriptions:
<ifc>
Interface
Indicates the interface on which a particular PDP context was defined. Every PDP context defined with the
command AT+CGDCONT or internally by the GPRS modem compatibility commands is identified one-to-one by
its (local) context identifier and the interface on which it was defined. The range of supported interfaces is
returned by the test command.
0
<cid>
PDP context identifier
The interface local identifier which was used to define a PDP context using the command AT+CGDCONT or
which was created internally by using the GPRS modem compatibility commands ATD*98# or ATD*99#. The
range of supported values is returned by the AT+CGDCONT test command. Values 3 and 4 will be used by the
GPRS modem compatibility commands ATD*98# or ATD*99# if no context identifier was specified as the
command was invoked.
<state>
PDP context activation state
Indicates the state of the PDP context activation.
0
1
<sum>
The sum of all activated PDP contexts of the ME.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
The test command returns supported interfaces and states.
The read command lists the activation states for all activated PDP contexts of the ME.
Contexts, which are created internally by the GPRS modem compatibility commands, will
displayed only, if they are activated. The Output of this command is unsorted.
The exec command returns the sum of all activated PDP contexts of the ME.
AT^SGACT=?
^SGACT: (range of supported <ifc>s) , (range of supported <state>s)
OK
AT^SGACT?
[^SGACT: <ifc>, <cid>, <state>]
[^SGACT: <ifc>, <cid>, <state>]
[^SGACT: ...]
OK
AT^SGACT
^SGACT: <sum>
OK
ASC0
Deactivated
Activated
Chapter 11 – GPRS Commands
189