Multi-Tech MultiModem EDGE Reference Manual page 232

Wireless edge modems
Table of Contents

Advertisement

<maxloc>
Maximum number of locations supported by the currently selected storage. For phonebooks located on SIM, this
value varies depending on the SIM card. See AT+CPBS for typical values.
<nlength>
Maximum length of phone number for "normal" locations. Depending on the storage, a limited number of
locations with extended memory is available per phonebook. These locations allow storing numbers with twice
the standard length, which is 2*<nlength> digits for normal numbers, but only <nlength> digits for numbers saved
with parameter <type>= 209. If all extended locations of the selected phonebook are used up, then any attempt
to write a number which requires extended memory will be denied with CME ERROR 260: INVALID DIAL
STRING.
<tlength>
Maximum length of <text> assigned to the telephone number. The value indicated by the test command is given
in octets. If the <text> string is given in GSM characters, each character corresponds to one octet. If the <text>
string is given in UCS2, the maximum number of characters depends on the coding scheme used for the alpha
field of the SIM. In the worst case the number of UCS2 characters is at least one less than half the number of
GSM characters.
For a detailed description please refer to GSM 11.11, Annex B.
Note:
Users should be aware that when using this AT command quickly after SIM PIN authentication, the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1, Restricted Access to SIM Data after SIM PIN Authentication.
Examples
Example 1 – Make a new phonebook entry at the first free location
AT+CPBW=,"+431234567",145,"international"
Example 2 – Delete entry at location 1
AT+CPBW=1
Example 3 – The following examples are provided to illustrate the effect of writing phonebook entries with
different types of dial string modifiers in <number>
AT+CPBW=5,"12345678",,"Arthur"
AT+CPBW=6,"432!+-765()&54*654#",,"John"
AT+CPBW=7,"432!+-765()&54*654#",129,"Eve"
AT+CPBW=8,"432!+-765()&54*654#",145,"Tom"
AT+CPBW=9,"432!+-765()&54*654#",209,"Richard"
Example 4 – Read phonebook entries from locations 5 - 9 via AT+CPBR
+CPBR:5,"12345678",129,"Arthur"
+CPBR:6,"432!+-765()&54*654#",209,"John"
+CPBR:7,"432+76554*654#",129,"Eve"
+CPBR:8,"+432+76554*654#",145,"Tom"
+CPBR:9,"432!+-765()&54*654#",209,"Richard"
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
Chapter 15 – Phonebook Commands
232

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem EDGE and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents