Information Elements Related To Ftp Service - Multi-Tech MultiModem EDGE Reference Manual

General URC Information Elements
46 Fatal: The service has detected an unknown error
47 *)
48 Remote peer has closed the connection
49 Fatal: No memory is available for service action
50 Fatal: Service hs detected an internal error.
80
84 PPP LCP FAILED
85 PAP Authentication failed
86 CHAP Authentication failed
87 IPCP failed
Warnings
4001
General Information Elements
6001

10.13.2 Information Elements Related to FTP Service

<urcInfoId> <urcInfoText>
100 FTP Server rejects session.
101 FTP Server rejects USER command.
102 FTP Server rejects PASS command.
103 FTP Server rejects PASV command or client
can't detect remote IP address.
104 FTP Server rejects requested client action.
105 The given path segment is wrong.
106 *)
2100 FILE: <filename>
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
Chapter 10 – Internet Service Commands
Indicates that the remote service
has closed the connection. The
host shall close the service.
Remote peer has closed the
connection unexpectedly, and no
data are available. The host shall
close the service.
Note that the "^SIS" URC only
indicates the <urcInfoId>, but the
AT^SISE command indicates both
the <urcInfoId> and the <urcInfo-
Text>.
Connection profile not defined.
PPP error
PPP error
PPP error
PPP error
Applies only to interactive text
mode: Indicates that number of
input characters is greater than
<cnfWriteLength>.
General progress information for
connection setup.
Description
The FTP client requests the file size from
the server before starting the download.
During transmission phase the client adds
the bytes which are sent via serial line. After
transmission is done the client compares the
amount of bytes transferred via serial line
and socket.
File name assigned by FTP server if
mode=u is used.
159