Multi-Tech MultiModem EDGE Reference Manual page 265

Abbreviations of Codes and Parameters used in Star-Hash Network Commands Table Above
Table 19.2
Abbreviation Meaning
ZZ Type of supplementary services:
Barring services
All services
DN Dialing number
BS Basic service equivalent to parameter class:
Voice
SMS
Data circuit asynchron
Data circuit synchron
dedicated PAD access
dedicated Packet access
Data circuit asynchron+PAD
Data circuit synchron+Packet
Data circuit asynchron+synchron+Packet+PAD
All Services
T Time in seconds
PW Password
C Character of TE character set (e.g., asterisks,
hash or digit in case of USSD, or digits in case of
held calls or multiparty calls)
Table 19.3 Star-Hash Command Response Parameters
Parameter
<m>
<n>
<status>
<class>
<fac>
<reason>
For exact specification of format and parameters for Star-Hash commands refer to GSM 02.04, Table 3.2 and
GSM 02.30, Annex C.
Table 19.4 Star-Hash Commands for Supplementary Services
Star-Hash Code
*
**
*#
#
##
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
Meaning
Mode: 0 = not active, 1 = active
Unsolicited result code: 0 = presentation disabled, 1 = presentation enabled
Status: 0 = not active, 1 = active
Represents BS = basic service, refer to AT+CCFC, AT+CLCK
Facility lock, refer to AT+CLCK
Call forwarding reason
Abbreviations in Table 19.1
act
reg
int
deact
eras
Chapter 19 – Summary Tables
Value
330
Not specified
String of digits 0-9
13
12
25
24
27
26
21
22
20
--
In contrast to AT+CCFC,
parameter T has no default
value. If T is not specified, an
operator defined default or the
last known value may be used,
depending on the network
operator.
--
--
Functionality
Activate (except for CLIR, see list above)
Register and activate
Check status (interrogate)
Deactivate (except for CLIR, see list above)
Unregister and deactivate
265