At^sset Indicate Sim Data Ready; At^scid Display Sim Card Identification Number; At+Cxxcid Display Sim Card Identification Number - Multi-Tech MultiModem EDGE Reference Manual

13.5 AT^SSET Indicate SIM Data Ready

Description:
Test Command Syntax:
Response(s):
Read Command Syntax:
Response(s):
Write Command Syntax:
Response(s):
Unsolicited Result Code:
^SSIM READY
Parameter Description:
<n>
URC presentation mode
0
1

13.6 AT^SCID Display SIM Card Identification Number

Description:
Test Command Syntax:
Response:
Exec Command Syntax:
Response:
Parameter Description:
<cid>

13.7 AT+CXXCID Display SIM Card Identification Number

Description:
Test Command Syntax:
Response:
Exec Command Syntax:
Response:
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
After power-up and personalization (PIN entry if required) the ME starts reading data from
SIM. The AT^SSET command controls the presentation of the "^SSIM READY" URC that
indicates on the corresponding serial channel when the ME has finished reading SIM data.
See Section 20.1, Restricted Access to SIM Data after SIM Authentication.
AT^SSET=?
^SSET: (list of supported <n>s)
OK
AT^SSET?
^SSET: <n>
OK
ERROR
+CME ERROR: <err>
AT^SSET=[<n>]
OK
ERROR
+CME ERROR: <err>
The URC acknowledges to the user that SIM data is accessible.
Disable URC "^SSIM READY" indication. Default.
Enable URC "^SSIM READY" indication.
TA returns the card identification number in SIM (SIM file EF
AT^SCID=?
OK
AT^SCID
^SCID: <cid>
OK
ERROR
+CME ERROR: <err>
Card identification number of SIM card.
TA returns the card identification number in SIM (SIM file EF
the same command as AT^SCID.
AT+CXXCID=?
OK
AT+CXXCID
+CXXCID: <cid>
OK
ERROR
+CME ERROR: <err>
Chapter 13 – SIM-Related Commands
) as string type.
ICCID
) as string type. This is
ICCID
223