15.8 AT^SPBC Find First Matching Entry in Sorted
Phonebook
Description:
Test Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Description:
<schar>
First character of the entry to be searched in the sorted list of phonebook entries.
<index>
In the active phonebook, the first (lowest) index number of an entry beginning with <schar>. As stated above, the
retrieved index number shall not be used to dial out or edit phonebook entries. If no matching phonebook entry is
found, <index>=0 will be returned.
Users should be aware that when using this AT command quickly after SIM PIN authentication, the SIM data
Note:
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1, Restricted Access to SIM Data after SIM PIN Authentication.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
The write command searches the current phonebook for the index number of the first
(lowest) entry that matches the character specified with <schar>. The AT^SPBC test
command returns the list of phonebooks which can be searched through with AT^SPBC.
Please note that AT^SPBC is assigned the same index as AT^SPBG or
CAUTION:
AT^SPBS which is not identical with the physical location numbers used in the various
phonebooks. Therefore, do not use the index numbers retrieved with AT^SPBC to dial out
or modify phonebook entries.
AT^SPBC=?
^SPBC: "FD","SM","ME"
OK
ERROR
+CME ERROR
AT^SPBC=<schar>
^spbc: <index>
OK
ERROR
+CME ERROR
Chapter 15 – Phonebook Commands
235
Need help?
Do you have a question about the MultiModem EDGE and is the answer not in the manual?