Multi-Tech MultiModem EDGE Reference Manual page 2

AT Commands for Multi-Tech EDGE Modems
MultiModem® EDGE (MTCBA-E)
MultiModem® EDGE with USB (MTCBA-E-U)
MultiModem® iCell (MTCMR-E)
MultiModem® rCell (MTCBA-E-EN2)
Embedded Wireless SocketModem® EDGE (MTSMC-E)
Reference Guide
PN S000371G, Revision G
Copyright
This publication may not be reproduced, in whole or in part, without prior expressed written permission from
Multi-Tech Systems, Inc. All rights reserved. Copyright © 2005-2009, by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and
specifically disclaim any implied warranties of merchantability or fitness for any particular purpose. Furthermore,
Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in
the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such
revisions or changes.
Revisions
Revision Level Date
A 07/07/05
B 01/24/06
C 02/08/07
D 05/14/07
E 05/08/08
F 01/15/09
G 05/13/09
Trademarks
MultiModem, SocketModem, and the Multi-Tech logo are registered trademarks of Multi-Tech Systems, Inc.
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112
Phone: 763-785-3500 or 800-328-9717
Fax: 763-785-9874
Internet Address: http://www.multitech.com
Technical Support
Country
Europe, Asia, Africa:
U.S., Canada, all others:
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
Description
Initial release.
Added trademarks and registered trademarks to the cover
page. Added a product list and a command list. Removed the
statement in 18.6 that the setting is stored non-volatile.
Changed light blue non-hyperlinked text to black.
Added new model MTZPC-E.
Updated the Technical Support contact list. Added Important
Note about Autobauding. Explained the ERROR message that
sometimes displays with the AT&V command.
Updated for version 04.001. New commands: SNWS, SFNUR,
SICI, SISI, SICO, SICC, SISX, SISE, Internet SIS, SCIM,
SPBW.
Added MultiModem® iCell (MTCMR-E) to the list of products
that use these commands. Removed model MTZPC-E from the
list of products that use these commands. Removed Fax
commands.
Added MultiModem® rCell (MTCBA-E-EN2) to the list of
products that use these commands.
By Email
support@multitech.co.uk
support@multitech.com
Copyright and Technical Support
By Phone
+(44) 118 959 7774
800-972-2439 or 763-717-5863
2