Multi-Tech MultiModem EDGE Reference Manual page 31

Write Command for GPRS Attach:
AT^SCFG="GPRS/AutoAttach"[, <gaa>]
Write Responses:
^SCFG: "GPRS/AutoAttach", <gaa>
OK
ERROR
+CME ERROR
Write Command for Persistent GPRS Contexts
AT^SCFG="GPRS/PersistentContexts"[, <gpc>]
Write Responses:
^SCFG: "GPRS/PersistentContexts", <gpc>
OK
ERROR
+CME ERROR
Write Command for Ring on Incoming GPRS IP Data Packets:
AT^SCFG="GPRS/RingOnIncomingData"[,<groid>]
Write Responses:
^SCFG: "GPRS/RingOnIncomingData", <groid>
OK
ERROR
+CME ERROR
Write Command for Query/Set Timeout Value for Power Saving Mode 9:
AT^SCFG="PowerSaver/Mode9/Timeout"[, <psm9to>]
Write Responses:
^SCFG: "PowerSaver/Mode9/Timeout", <psm9to>
OK
ERROR
+CME ERROR
Write Command for Radio Band Selection
AT^SCFG="Radio/Band"[, <rbp>][, <rba>]
Write Responses:
^SCFG: "Radio/Band", <rbp>, <rba>
OK
ERROR
+CME ERROR
Write Command for Query/Enable/Disable Continuous Network Search
AT^SCFG="Radio/CNS"[, <cns>]
Write Responses:
^SCFG: "Radio/CNS", <cns>
OK
ERROR
+CME ERROR
Write Command for Query/Enable/Disable First Network Scan over all Radio Bands
AT^SCFG="Radio/FirstScan"[, <firstscan>]
Write Responses:
^SCFG: "Radio/FirstScan", <firstscan>
OK
ERROR
+CME ERROR
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
Chapter 2 – Configuration Commands
31