At+Cmss Send Short Messages From Storage; At+Cnma New Sms Message Acknowledge To Me/Te Phase 2 - Multi-Tech MultiModem EDGE Reference Manual

12.9 AT+CMSS Send Short Messages from Storage

Description:
Test Command Syntax:
Response:
Write Command Syntax:
Response:
Write Command Syntax:
Response:
12.10 AT+CNMA New SMS Message Acknowledge to ME/TE
Phase 2+
Description:
Test Command Syntax:
Response:
Exec Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Description:
<n>
0 Parameter is only required for PDU mode. Command operates similarly as in text mode.
Notes:
• The execute / write command shall only be used when AT+CSMS parameter <service> equals 1 (= phase 2+).
•
Both the execute and the write command can be used no matter whether text mode or PDU mode is activated.
The write command is designed for the PDU mode only.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
The write command sends message with location value <index> from message storage
<mem2> to the network (SMS-SUBMIT or SMS-COMMAND). If new recipient address
<da> is given for SMS-SUBMIT, it shall be used instead of the one stored with the
message. Reference value <mr> is returned to the TE on successful message delivery.
Value can be used to identify message upon unsolicited delivery status report result code.
If the optional parameter <da> is given, the old status of the short message at <index>
remains unchanged (see <stat>).
AT+CMSS=?
OK
If text mode (AT+CMGF=1):
AT+CMSS=<index>[, <da>[, <toda>]]
+CMSS: <mr>[, <scts>]
OK
If sending fails
ERROR
+CMS ERROR
If PDU mode (AT+CMGF=0):
AT+CMSS=<index>[, <da>[, <toda>]]
+CMSS: <mr>[, <ackpdu>]
OK
If sending fails
ERROR
+CMS ERROR
The write / execute command confirms successful receipt of a new message (SMS-
DELIVER or SMS-STATUSREPORT) routed directly to the TE. TA shall not send another
+CMT or +CDS result code to TE until previous one is acknowledged. If ME does not
receive acknowledgment within required time (network time-out), ME sends RP-ERROR
to the network. TA shall automatically disable routing to TE by setting both <mt> and <ds>
values of AT+CNMI to zero.
AT+CNMA=?
+CNMA: (list of supported <n>s)
OK
AT+CNMA
OK
ERROR
+CMS ERROR
AT+CNMA=<n>
OK
ERROR
+CMS ERROR
Chapter 12 – Short Message Service (SMS) Commands
204