At+Crc Set Cellular Result Codes For Incoming Call Indication; At+Csns Single Numbering Scheme - Multi-Tech MultiModem EDGE Reference Manual

7.24 AT+CRC Set Cellular Result Codes for Incoming Call
Indication
Description:
Test Command Syntax:
Response:
Read Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Descriptions:
<mode>
0 Disable extended format. Default.
1 Enable extended format
<type>
"REL ASYNC" Asynchronous non-transparent
"VOICE" Voice
"GPRS" <PDP_type>, <PDP_addr> [,[<L2P>][,<APN>]] GPRS network request for PDP context activation
Unsolicited Result Codes:
URC 1
RING
Indicates incoming call to the TE if <mode>=0.
URC 2
+CRING: <type>
Indicates incoming call to the TE if <mode>=1.

7.25 AT+CSNS Single Numbering Scheme

Description:
Test Command Syntax:
Response:
Read Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Description:
<mode>
0 Voice: Each call received without bearer element is assumed to be speech. Default.
4 Data: Each call received without bearer element is assumed to be a data call.
Please take into account that the bearer service parameters set with AT+CBST apply to all data
calls including those received without bearer capability.
Notes:
•
The command must be set before the call comes. By default, when you do not modify the settings, all calls
received without bearer element are assumed to be voice.
•
If problems are encountered with CSD connections at 14.4 kbit/s you may be required to change the Fixed
Network User Rate depending on the network. See AT^SFNUR for details.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
The AT+CRC command controls whether or not to use the extended format of incoming
call indication.
<mode>=1 may lead to a connection failure if the application
default URC.
AT+CRC=?
+CRC: (list of supported<mode>s)
OK
ERROR
AT+CRC?
+CRC: <mode>
OK
ERROR
AT+CRC=[<mode>]
OK
ERROR
The AT+CSNS command enables the ME to accept incoming calls when no bearer
capability information is provided with the call; e.g., single numbering scheme calls or calls
originating from analog devices.
AT+CSNS=?
+CSNS: (list of supported<mode>s)
OK
AT+CSNS?
+CSNS: <mode>
OK
AT+CSNS=[<mode>]
OK
ERROR
+CME ERROR
Chapter 7 – Call-Related Commands
(e.g., WinFax) waits for the
96