At+Cgeqmin 3G Quality Of Service Profile (Minimum Acceptable) - Multi-Tech MultiModem EDGE Reference Manual

11.7 AT+CGEQMIN 3G Quality of Service Profile (Minimum
Acceptable)
The test command returns values supported as a compound value.
Description:
The read command returns the current settings for each defined context.
The write command allows the TE to specify a Quality of Service Profile for the context identified
by the (local) context identification parameter <cid> which is checked by the MT against the
negotiated profile returned in the Activate/Modify PDP Context Accept message. A special form of
the write command, AT+CGEQMIN=<cid> causes the requested profile for context number <cid> to
become undefined.
AT&F and ATZ will remove the definition of the QoS profiles of every context which is not active or
not online.
Test Command Syntax:
Response(s):
Read Command Syntax:
Response(s):
Write Command Syntax:
Response(s):
Parameter Descriptions:
<cid>
Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is
used in other PDP context-related commands.
1...2
<Traffic class>
0
1
2
3
4
<Maximum bitrate UL>
This parameter indicates the maximum number of kbits/s delivered to UMTS (up-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g., AT+CGEQMIN=...,32,...).
0
1...63
64...128
256
512
<Maximum bitrate DL>
This parameter indicates the maximum number of kbits/s delivered by UMTS (down-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g., AT+CGEQMIN=...,32,...).
0
1...63
64...256
512
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
AT+CGEQMIN=?
+CGEQMIN : <PDP_type>, (list of supported <Traffic class>s), (list of supported
<Maximum bitrate UL>s), (list of supported <Maximum bitrate DL>s), (list of supported
<Guaranteed bitrate UL>s), (list of supported <Guaranteed bitrate DL>s), (list of supported
<Delivery order>s), (list of supported <Maximum SDU size>s), (list of supported <SDU
error ratio>s), (list of supported <Residual bit error ratio>s), (list of supported <Delivery of
erroneous SDUs>s), (list of supported <Transfer delay>s), (list of supported <Traffic
handling priority>s)
OK
AT+CGEQMIN?
[+CGEQMIN: <cid>, (list of supported <Traffic class>s), (list of supported <Maximum
bitrate UL>s), (list of supported <Maximum bitrate DL>s), (list of supported <Guaranteed
bitrate UL>s), (list of supported <Guaranteed bitrate DL>s), (list of supported <Delivery
order>s), (list of supported <Maximum SDU size>s), (list of supported <SDU error ratio>s),
(list of supported <Residual bit error ratio>s), (list of supported <Delivery of erroneous
SDUs>s), (list of supported <Transfer delay>s), (list of supported <Traffic handling
priority>s)] [+CGEQMIN: ...]
AT+CGEQMIN=[<cid>[, <Traffic class>[, <Maximum bitrate UL>[, <Maximum bitrate DL>[,
<Guaranteed bitrate UL>[, <Guaranteed bitrate DL>[, <Delivery order>[, <Maximum SDU
size>[, <SDU error ratio>[, <Residual bit error ratio>[, <Delivery of erroneous SDUs>[,
<Transfer delay>[, <Traffic handling priority>]]]]]]]]]]]]]
OK
ERROR
+CME ERROR
conversational
streaming
interactive
background
subscribed value. Default
subscribed value. Default.
(value needs to be divisible by 8 without remainder)
subscribed value. Default.
(value needs to be divisible by 8 without remainder)
Chapter 11 – GPRS Commands
177