Multi-Tech MultiModem EDGE Reference Manual page 12

Figure 1.2: Extension character table of GSM 03.38 alphabet
This code value is reserved for the extension to another extension table. On receipt of this code, a receiving
1.
entity shall display a space until another extension table is defined.
This code represents the EURO currency symbol. The code value is the one used for the character 'e'. Therefore
2.
a receiving entity which is incapable of displaying the EURO currency symbol will display the character 'e'
instead.
This code is defined as a Page Break character and may be used for example in compressed CBS messages.
3.
Any mobile which does not understand the 7 bit default alphabet table extension mechanism will treat this
character as Line Feed.
In the event that an MS receives a code where a symbol is not represented in Figure 1.2, Extension character table of
GSM 03.38 alphabet the MS shall display the character shown in the main default 7 bit alphabet table (The Main
character table of GSM 03.38 alphabet).
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
Chapter 1 – Introduction
12