At^sgauth Set Type Of Authentication For Ppp Connection; At^sgconf Configuration Of Gprs-Related Parameters - Multi-Tech MultiModem EDGE Reference Manual

11.15 AT^SGAUTH Set Type of Authentication for PPP
Connection
Test Command Syntax:
Response:
Read Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Descriptions:
Indicates types of supported authentication.
<auth>
0 none
1 PAP Default
2 CHAP
3 MS-CHAP-V1, CHAP and PAP
11.16 AT^SGCONF Configuration of GPRS-Related
Parameters
Test Command Syntax:
Response:
Read Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Descriptions:
<llc_pdu_length_U>
The maximum number of octets in an information field of Unnumbered (U) frames. Parameter is non-volatile.
0 No negotiation with network (500 will be used)
140...1520 Lower values diminish performance. Default = 500.
<llc_pdu_length_I>
The maximum number of octets in an information field of Combined (I) frames. Parameter is non-volatile.
0 No negotiation with network (500 will be used)
140...1520 Lower values diminish performance. Default = 500.
<GPRS msclass>
GPRS Multislot Class. The value can be one of the classes indicated with the Test command. The value set is
volatile and power up value is the maximum allowed.
<EGPRS msclass>
EGPRS Multislot Class. The value can be one of the classes indicated with the Test command. The value set is
volatile and power up value is the maximum allowed.
Notes:
•
+CME ERROR: invalid index: Parameter is out of range
• +CME ERROR: operation temporary not allowed: The command is blocked as long as GPRS is already in use
(as long as mobile is GPRS attached).
•
Writing to user profile with AT&W and restoring with AT&F are not supported.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
AT^SGAUTH=?
^SGAUTH: (list of supported <auth>s)
OK
ERROR
+CME ERROR
AT^SGAUTH?
^SGAUTH: <auth>
OK
ERROR
+CME ERROR
AT^SGAUTH=<auth>
OK
ERROR
+CME ERROR
AT^SGCONF=?
^SGCONF : (list of supported <llc_pdu_length>_U>s), (list of supported
<llc_pdu_length>_I>s), (list of supported <GPRS msclass>es), (list of supported <EGPRS
msclass>es)
OK
AT^SGCONF?
^SGCONF: <llc_pdu_length_U>, <llc_pdu_length>_I>, <GPRS msclass>, <EGPRS
msclass>
OK
AT^SGCONF=[<llc_pdu_length_U>][, [<llc_pdu_length>_I>][, [<GPRS
msclass>][<EGPRS msclass>]]]]
OK
ERROR
+CME ERROR
Chapter 11 – GPRS Commands
190