At+Clvl Loudspeaker Volume Level; At+Cmut Mute Control - Multi-Tech MultiModem EDGE Reference Manual

16.4 AT+CLVL Loudspeaker Volume Level

Test Command Syntax:
Response:
Read Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Description:
<level>
Loudspeaker Volume Level
0...4 Default = 4
Notes:
• The write command can only be used in audio mode 2 - 6.
•
The values of the volume steps are specified with the parameters <outCalibrate>[0],...<outCalibrate>[4] of the
AT^SNFO command.
• As an alternative to AT+CLVL, you can use AT^SNFO and AT^SNFV. The parameter <level> is identical with
<outStep> used by both commands.
•
Any change to <level> (or <outStep>) takes effect in audio modes 2 to 6. That is, when you change <level> (or
<outStep>) and then select another mode with AT^SNFS, the same step will be applied.
The only exception is audio mode 1 which is fixed to <level>=4 (or accordingly <outStep>=4).
• <level> (or <outStep>) is stored non-volatile when the ME is powered down with AT^SMSO or reset with
AT+CFUN=1,1.

16.5 AT+CMUT Mute Control

Description:
Test Command Syntax:
Response:
Read Command Syntax:
Response:
Write Command Syntax:
Response:
Parameter Description:
<mute>
0
1
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
AT+CLVL=?
+CLVL: (list of supported<level>s)
OK
AT+CLVL?
+CLVL: <level>
OK
ERROR
+CME ERROR: <err>
AT+CLVL=<level>
OK
ERROR
+CME ERROR: <err>
The AT+CMUT command mutes the microphone input. The command can be used in all
audio modes (1 to 6) and during a voice call only. See AT^SNFS for more details on the
various audio modes. As alternative, you can use the AT^SNFM command.
During an active call, users should be aware that when they switch back and forth
between different audio modes (for example handsfree on/off) the value of <mute> does
not change; i.e., the microphone mode is retained until explicitly changed.
AT+CMUT=?
+CMUT: (list of supported<mute>s)
OK
AT+CMUT?
+CMUT: <mute>
OK
ERROR
+CME ERROR: <err>
AT+CMUT=<mute>
OK
ERROR
+CME ERROR: <err>
Mute off. Default.
Mute on
Chapter 16 – Audio Commands
242